Proper installation is critical for submersible pump performance:
Installation Steps:
1. Preparation:
• Inspect pump and cable for damage
• Ensure well or sump is clean
• Check power supply matches specifications
2. Lowering the Pump:
• Attach lifting cable (not electrical cable)
• Lower pump slowly into position
• Maintain minimum clearance from bottom (30cm)
• Secure cable at top
3. Electrical Connection:
• Use qualified electrician
• Install proper circuit protection
• Ensure waterproof connections
• Test before final installation
4. Testing:
• Run pump and check for vibration
• Verify flow rate and pressure
• Check for leaks
See installation manual for complete instructions.
